Battery powered miniature
Linear encoder and indicator |
| |
|
|
Functions |
 |
No connections resp. wirings necessary |
 |
|
|
Open PCB building method for adaptation to most diverse
machine types |
|
|
Custom specified front design and keypad available |
|
|
Direct assembly with the magnetic tape (integrated
sensor) |
|
|
1 mm resolution / repeat accuracy +/- 0.1 mm |
|
|
Extensive programmable parameters |
|
|
Pulse scaling factor and decimal place |
|
|
Inch or Millimeters switch over |
|
|
External battery box, 1.5 V Battery (Size C) |
|
|
Indication of battery state / measuring unit |
|
|
12 months in continuous operation (with a good battery) |
|
|
Features |
| The magnetic length measuring system Z10 is a
combination of an indicator and a magnet sensor, which is
integrated in the display unit and already electrically
connected. Therefore no wirings or connections are necessary
with the installation. In standard variant, an external
battery case with a 1.5 Volt battery feeds the unit with
power. The battery case is connected by a 10 cm long
double-core cable to the indicator unit. Other 1.5 V -
Battery sizes can be realized on request. The stan-dard
system is supplied in principle as open PCB variant (without
housings), in order to make possible an individual
adaptation to diverse machine types. On demand, a
cus-tomized housing and/or front design can be developed. A
special version number (SN number) for a definitely
identification or possible re-orders, will be created (see
Type designation) then. |
| |
|
|
Technical Specifications |
| LCD display: |
6 digits with sign, digit height 8mm |
| Power supply: |
1.5 V battery (sice C) |
| Power consumption: |
approx. 1 mA |
| Operation speed: |
maximum 2.5 m/sec |
| Resolution of
magnetic sensor: |
0.1 mm |
| Housing: |
Open PCB for machine modulation |
| PCB dimensions
(mm): |
W x H x D = 53 x 30 x 16 |
| Size C battery box
dimensions (mm): |
L x W x H = 60 x 32 x 27 |
| Protection class: |
IP00 (open PCB) |
| Operation
temperature: |
+ 5...+ 50 ° C |
| Mounting gap to the
tape: |
max. 0.8 mm |
| Use able magnetic
tape: |
MB20.25 (2.5 mm pole distance) |
|
|
|