Home Page About Us Products Serices Support Contact us
Measuring > Linear Encoders > EMAX
Absolute length measuring system with or without mechanical guide.
Available rail length for the guided system:
• max. 2 meters
(to reach the max. measuring length of 10 m, it's possible to arrange five 2 m rails).
Owing to its high accuracy and operating speed as well as the connection to bus systems, the ELGO measuring system EMAX is ideal for a lot of industrial measuring tasks.
maximum measuring length:
The "absolute" ELGO linear encoder EMAX (with FW2080) measures linear movements. Movements of the encoder are also registered in the "power-down" status or after power failure. Thus no more reference procedures are necessary. A maximum in safety is guaranteed.
Technical Specifications
resolution: 10 m
repeat accuracy: 0.01mm (+/- 1 increment )
operation speed: 4.5 m/s (faster in preparation)
max. readout frequency: 1 KHz
max. distance sensor-tape: 0.8 mm
max. angular deflection (angle of torque sensor head): 10 - 30 VDC (+/- 10 %)
power consumption: max. 120 mA
signal level: 5V-TTL at RS422, SSI, CAN,
-5V...+ 5V at RS232
available interfaces: RS422, SSI, CAN, RS232, Profibus (with converter PNO1)
all variants:
protection class: IP 54 (Standard), IP67 (Option V)
operating temperature: 0 °...+ 50 °C
dimensions: EMAX: 78 x 24 x 33 mm (L x W x H)
EMAX with FW2080 100 x 48 x 34 mm (L x W x H)
Mactrol.org @ 2010   B- 16/2, Meerut Road, Indl. Area,
Ghaziabad- 201 103