Whether used as a stand-alone device or as expansion of an existing machine tool, SD2T by SIEB & MEYER offers
the perfect basis for driving synchronous and asynchronous spindles or motors with speeds up to 480,000 rpm.
All components necessary for the self suffi cient operation as for example operating and display elements as well
as motor chokes are already integrated in the device. Furthermore, SD2T can be connected to an existing machine
control via analog reference signals (+/-10 V), digital I/Os or USB. The low-voltage version of SD2T is equipped
with a galvanic separation of the power unit which protects the sensitive isolation of low-voltage motors.
The feature of saving up to 64 motor parameter sets in the drive enables the variable operation with different
motors. The devices in table top design are available as low-voltage version with output voltages up to 60 V and
as high-voltage version with output voltages up to 220 V.
|
 |
|
Features of the Low-voltage Version:
|
- Use also in public mains by integrated PFC and
compliance with the EMC limit values according
to DIN / EN 61800-3, category C1 or DIN / EN 55011 –
Limit values for devices of class B / group 1 and 2
- Controlled intermediate circuit
-
Output voltage up to 3 x 60 VAC
- Output power up to 600 VA (S1 operation)
- Short-circuit monitoring
- No external motor chokes required
-
Protection of the spindle isolation by
galvanic separation from the mains supply.
-
Compact and solid table top housing in IP20 design
|
Features of the High-voltage Version:
|
- Output voltage up to 3 x 220 VAC
- Output power up to 3.8 kVA (S1)
-
Short-circuit monitoring
- No external motor chokes required
- Compact and solid table top housing in IP20 design
- Optionally available as 19“ solution
*SD2T 3.8 kVA /600 VA (left) and SD2T 300 VA (right)
|
LCD status display for the
indication of operating data:
|
- Parameters
- Reference / actual speed
-
Load display
- Active spindle
- Error messages
LED status displays for:
- Ready for operation
- Load message
Operator panel for operation,
spindle selection and parameterization
|
|
Technical Specifi cations SD2T
1-phase supply
110 – 230 V power supply (AC) / 60 V output voltage |
300 VA |
Ir: 8 A |
IP: 14 A |
120 x 240 x 220 mm |
600 VA |
Ir: 14 A* |
IP: 20 A* |
120 x 275 x 220 mm |
|
110 – 230 V power supply (AC) / up to 230 V output voltage |
3.8 kVA |
Ir: 10 A* |
IP: 28A* |
120 x 275 x 220 mm |
Ir = rated current, IP = peak current (1s). Stated currents are rms values.
Voltage limits: -10% / +10%
The device dimensions are defi ned as height x width x depth,
related to the mounting dimensions. |