Home Page About Us Products Serices Support Contact us
VCP 02


The IndraControl VCP 02 compact terminal is a machine operator terminal that can initiate specific machine functions according to your application. Because of its compact construction and continuous sealing on the back side of the device, it is particularly versatile - it allows every possible mounting position.
Depending on the version, the compact terminal is equipped with three serial interfaces or with a fieldbus interface. The front panel with short-stroke keypad consists of a 3 mm thick aluminum plate with beveled edges, which is coated with a chemical-resistant polyester film with raised embossing.
The compact terminal is equipped with a special operating system. The operating system can be reinstalled into the device (firmware download), if necessary, using the VI-Composer programming software.
 Performance Characteristics   VCP 02 
     text terminal 
      Type   LC display 
     LED, backlit 
      Characters/Line   20/4 
      Resolution   4 x 20 characters 
      Viewing Angle   90° 
      Basic Contrast Settings   by operating mode switch 
      Contrast Settings   temperature-compensated 
      LCD Life Span   100,000 h 
      Half-Time Life of Backlighting   100,000 h 
      Display Surface   74 mm x 23 mm (H x W) 
 Front Panel and Housing    
      Housing   steel sheet metal, galvanized 
      Front Panel   aluminum, anodized 
     96 mm x 144 mm x 3.5 mm (H x W x D) 
      Front Overlay   polyester film 
      Sealing   continuous foam seal on back 
      Certifications   CE/UL/CSA 
      Front Protection   IP65 
      Back Protection   IP20 
      Total Weight   approx. 400 g 
      Dimensions (W x H x D in mm)   148 x 100 x 43 
      Mounting Cutout   82 mm x 138 mm (H x W) 
      Installation Depth   approx. 42 mm (without plug) 
      Type   short-stroke 
      Number of Keys   11 
      Key Surface (Embossing)   edit keys, control keys, custom keys: 14 mm x 15 mm, function keys: 13.6 mm x 15 mm 
      Function/System Keys   4/7 
      Actuation Strength   2 N to 3 N 
      Actuation Distance   0.5 mm 
      Life-Span (min.)   1 million switching cycles 
      Display Components   6 status LEDs 
 Central Unit    
      Central Unit   Z84 
      Clock Frequency   10 MHz 
      Other Characteristics   watchdog timer, real-time clock, temperature compensation of the display, battery monitoring 
      Application   256 kB Flash 
      Firmware   256 kB Flash 
      CMOS RAM   128 kB stat., batt. buffered 
      Serial Interface   RS232/RS485 
      Profibus DP Interface   optional 
      Interbus Interface   optional 
      DeviceNet Interface   - 
      Ethernet Interface VCP02.2 only
 Electrical Data    
      Supply Voltage   24 V DC 
      Residual Ripple   maximum 10% 
      Minimum Voltage   19.2 V 
      Maximum Voltage   30.2 V 
      Current Input   0.3 A 
      Connected Load   7.2 W 
      Fuse   semiconductor fuse, auto-resetting 
      Polarization   integrated 
 Environmental Conditions    
      Ambient Temperature for Operation   0 °C to 50 °C 
      Ambient Temperature for Storage/Transport   - 20 °C to + 70 °C 
      Relative Humidity for Operation   10% to 95%, non-condensing 
      Relative Humidity for Storage/Transport   10% to 95%, non-condensing 
      Area of Application   pollution level 1, overvoltage category II 
Mactrol.org @ 2010   B- 16/2, Meerut Road, Indl. Area,
Ghaziabad- 201 103