Features
The IndraControl VCP 25 compact terminal is a machine operator terminal that can initiate specific functions in the machine, depending on the application.
The IndraControl VCP 25 compact terminal is a machine operator terminal that can initiate specific functions in the machine, depending on the application.
Because of its compact construction and continuous sealing on the back side of the device, it is particularly versatile. Additionally, it allows every possible mounting position.
Depending on the version, the compact terminal is equipped with three serial interfaces or with a fieldbus interface.
The front panel with touch screen allows operation via the touch-sensitive surface of the display, without a keypad.
The compact terminal is equipped with a special operating system. The operating system can be reloaded into the device (firmware download), if necessary, using the
VI-Composer programming software.
|
|
|
Specifications
|
|
touch terminal |
Display |
|
Type |
5.7" STN touch (analog/resistive), |
|
16 colors, fully graphics-capable |
Characters/Line |
- |
Resolution |
320 x 240 pixels |
Colors |
256 |
Viewing Angle |
90°C |
Basic Contrast / Basic Brightness Settings |
using operating mode switch |
Contrast Settings |
temperature-compensated |
LCD Life-Span |
100,000 h |
Half-Life Time of Background Lighting |
40,000 h |
Lines |
20 |
Characters/Line |
40 |
Display Surface (H x W) |
90 mm x 120 mm |
Touch-Screen |
|
Type |
analog resistive, 4-wire technology |
Activation Pressure |
15 g (standard) |
|
with R0.8 Polyoxymethylene (POM) stick or R8 HS60 silicon rubber |
Robustness |
after 3 million touches, no damage or misfunctions occurred under the following
conditions: |
|
touch, component: R8, HS40 silicon rubber |
|
touch pressure: 150 g |
|
touch frequency: 3 Hz |
Front Panel and Housing |
|
Housing |
steel sheet metal, galvanized |
Front Panel |
aluminum, naturally anodized, 180 mm x 234 mm x 5 mm (H x W x D) |
Front Overlay |
polyester film |
Sealing |
continuous rubber seal on back |
Mounting Cutout |
140 mm x 196 mm (H x W) |
Installation Depth |
standard device: approx. 48 mm (w/out plug), |
|
Fieldbus Device: approx. 70 mm (w/out plug) |
Certifications |
CE/UL/CSA |
Front Protection |
IP65 |
Back Protection |
IP20 |
Total Weight |
approx. 1100 g |
Dimensions (W x H x D in mm) |
220 x 152 x 48/70 (Depth dependent on interface, serial or Profibus DP) |
Keypad |
|
Type |
- |
Function/System Keys |
- |
Central Unit |
32-bit RISC CPU |
Clock Frequency |
74 MHz |
Other Characteristics |
watchdog timer, real-time clock, temperature-compensation of the display,
battery monitoring |
Memory |
|
Application |
3 MB |
Firmware |
|
CMOS RAM |
512 kB stat., battery buffered |
Connections |
|
Serial Interface |
RS232/RS485 |
Profibus DP Interface |
optional |
Interbus Interface |
optional |
DeviceNet Interface |
optional |
Ethernet Interface |
VCP25.2 only |
Electrical Data |
|
Supply Voltage |
24 V DC |
Residual Ripple |
maximum 10% |
Minimum Voltage |
19.2 V |
Maximum Voltage |
30.2 V |
Current Input |
0.4 A |
Connected Load |
10 W |
Fuse |
semiconductor fuse, auto-resetting |
Polarization |
integrated |
Environmental Conditions |
|
Ambient Temperature for Operation |
0 °C to 50 °C |
Ambient Temperature for Storage/Transport |
- 25 °C to + 60 °C |
Relative Humidity for Operation |
10% to 95%, non-condensing |
Relative Humidity for Storage/Transport |
10% to 95%, non-condensing |
Area of Application |
pollution level 1, overvoltage category II |
|